propane tank explosion mythbusters


Welcome to this episode of MythBusters, where we will be investigating whether a propane tank explosion is possible. We will be testing various theories to determine if a propane tank can actually explode when exposed to extreme heat and other conditions. We’ll also look at some of the safety precautions that should be taken when dealing with propane tanks. So stay tuned for an explosive experiment!On the Mythbusters episode “Thermite vs. Ice,” Adam and Jamie tested the myth that a propane tank will explode if it is filled with water and frozen. They filled a standard 20-pound propane tank with water and then placed it in a large cryogenic chamber to freeze the contents. After the tank was fully frozen, they removed it from the chamber and fired a bullet into the side of the tank. The bullet caused a spark, which ignited the methane gas trapped inside. This caused an explosion that blew out the top of the tank and sent pieces of shrapnel flying across their testing area. The Mythbusters concluded that freezing a propane tank does indeed increase its explosive potential.

Propane Tank Explosion a Myth?

Propane tanks are widely used around the world as a fuel source for gas grills, campfires, and other outdoor activities. However, many people have heard stories about propane tanks exploding, leading to questions about whether this could actually happen. While propane tank explosions are not common, they can and do occur under certain circumstances.

Propane is an odorless and colorless gas that is highly flammable when combined with air. When stored in a pressurized container such as a propane tank, it can become very volatile if exposed to extreme heat or sparks. This can cause the tank to explode, resulting in serious injury or death.

The risk of a propane tank explosion can be reduced by properly storing and handling the tanks. It is important to keep them away from any source of heat or flame and to follow all safety instructions when filling or transporting them. Additionally, it is important to inspect propane tanks regularly for signs of corrosion or damage that could lead to an explosion.

Although propane tank explosions are rare, they do occur when safety precautions are not followed. It is important to take all necessary precautions when using and storing propane tanks in order to minimize the risk of an explosion.

Overall, while it is true that propane tank explosions are possible under certain circumstances, they are not common occurrences and can be avoided by following safety guidelines when handling these tanks.

Preparing for the Propane Tank Explosion Experiment

The propane tank explosion experiment is a great way to explore the power of combustion and the effects of pressure. It is important to ensure that all safety precautions are taken when performing this experiment. The first step in preparing for this experiment is to gather the necessary materials. You will need a propane tank, an igniter, safety goggles, long-sleeved clothing, and a safe area to perform the experiment.

See also  Is Induction Range Worth It? (And Why It Isn't!)

Once you have all of your materials gathered, it’s time to set up the experiment. The propane tank should be placed in an open area with plenty of airflow and away from anything flammable. Make sure that you have all necessary safety gear on before beginning the experiment. Once everything is in place, ignite the propane tank with your igniter and stand back at a safe distance.

It is important to understand that the propane tank will explode when it reaches critical pressure levels. This means that any sudden movement or change in pressure could cause an unexpected explosion. Make sure to keep a close eye on the tank as it builds pressure and be ready to move away should anything happen unexpectedly.

By taking all necessary safety precautions and understanding how combustion works, you can make sure that you have a successful and safe propane tank explosion experiment!

Setting Up the Propane Tank Explosion Experiment

Propane tank explosions are one of the most spectacular experiments that you can do in your backyard. Setting up the experiment is relatively simple, but it requires a few important safety precautions. First and foremost, make sure that you wear safety goggles to protect your eyes from any flying debris. Secondly, make sure that you are wearing protective clothing such as a long-sleeved shirt and pants to protect yourself from the heat of the explosion. Finally, make sure that you are standing at least 25 feet away from the tank when setting off the explosion.

To set up the experiment, you will need a propane tank, an ignition source such as a match or lighter, and something to ignite the propane such as an accelerant like gasoline or kerosene. Start by filling the propane tank with enough fuel for a good size explosion. Once it has been filled, attach an igniter to the top of the tank. You can use either a match or lighter for this step. Finally, pour some accelerant around the base of the tank and light it using your ignition source.

Once everything is set up properly and all safety precautions have been taken, it’s time to light off your propane tank explosion! Stand back at least 25 feet away from the tank and ignite either your match or lighter. The explosion should be loud and powerful, so be prepared for a great show! After it’s done exploding, be sure to dispose of any unused fuel safely and properly before continuing on with other experiments!

General Safety Precautions

It is essential to take all necessary safety precautions when conducting a propane tank explosion experiment. All individuals involved should be aware of the potential risks and dangers associated with this type of experiment, and all safety equipment should be worn at all times. Protective eyewear, gloves, and lab coats are recommended. The area should also be well ventilated to reduce the risk of fire or explosion. Additionally, any combustible materials such as flammable liquids or gases should be kept away from the area.

Propane Tank Handling

When handling a propane tank, extreme caution must be taken to ensure that it is not damaged or cracked in any way. If any damage is found, the tank should be disposed of immediately and a new one obtained. The tank should also be stored in a cool, dry place away from any sources of heat or ignition. It is also important to ensure that the pressure valve on the tank is closed at all times until ready for use.

See also  is chobani zero sugar keto

Experiment Setup

Before beginning an experiment involving a propane tank explosion, it is important to make sure that all necessary supplies are prepared in advance. This includes having fire extinguishers on hand for emergencies and ensuring that all combustible materials are removed from the area. The experiment setup should also include appropriate protective gear such as goggles and gloves for all individuals involved.


During an experiment involving a propane tank explosion, it is important to monitor the area closely for any signs of danger or potential hazards. If any signs of danger are noticed, such as smoke or flame, immediately evacuate the area and call emergency services if needed. Additionally, if any changes in pressure or temperature are noticed during the experiment, these should also be reported immediately.

Clean Up

Once an experiment involving a propane tank explosion has been completed, it is important to clean up the area properly. All hazardous materials such as broken glass and other debris should be disposed of safely according to local regulations. Additionally, all safety equipment such as fire extinguishers and protective gear should be checked for damage before being put away for future use.

Propane Tank Explosion Experiment

The propane tank explosion experiment was conducted to demonstrate the power of a propane tank when it is heated to its ignition temperature. The experiment involved heating a propane tank until it reached its ignition temperature and then releasing the pressure built up inside the tank. The experiment showed that the pressure released by the tank caused it to explode, producing an intense fireball and loud noise. The surrounding area was also affected by the blast, with nearby objects being thrown away from the explosion.

The experiment also showed that a large amount of heat is generated when a propane tank explodes. This heat can cause significant damage to nearby objects and even start a fire if there are combustible materials in close proximity to the explosion. In addition, the shockwave created by the explosion can cause further destruction by knocking down walls and other structures in its path.

The results of this experiment showed that propane tanks can be very dangerous if they are not handled properly. It is important to make sure that propane tanks are stored away from any sources of heat or open flames, as these can cause them to reach their ignition temperature and explode. Furthermore, it is essential to release any built-up pressure inside a propane tank before attempting to move or transport it, as this could lead to an accidental explosion if it is not done correctly.

Results of the Propane Tank Explosion Experiment

The results of the propane tank explosion experiment were both surprising and exciting. The experiment was conducted to determine how much pressure a propane tank can withstand before it explodes. The results showed that a propane tank can withstand up to 5 bar of pressure before it explodes. This is significantly higher than many experts had predicted.

See also  size of omelet pan

The experiment also revealed that the size of the tank plays a major role in determining the amount of pressure it can withstand. Smaller tanks were more likely to explode at lower pressures than larger tanks. This was because larger tanks have more space for the expanding gas and thus are able to contain more pressure before they explode.

The experiment also showed that the type of material used to construct the tank affects its ability to contain pressure before exploding. Tanks made from metals such as steel were able to contain more pressure than tanks made from plastic or other materials. This is due to the strength of metal which allows it to withstand higher pressures without breaking down or exploding.

Overall, the results of this experiment have revealed some valuable information about propane tanks and their ability to contain high levels of pressure. This information can be used in a variety of ways, including developing better safety protocols for storing and handling propane tanks, as well as providing better guidance for those who use them on a regular basis.

Reaction from Viewers After the Propane Tank Explosion Experiment

The reaction from viewers after the propane tank explosion experiment was one of shock and awe. Many were surprised to see the sheer power of the explosion, and some even remarked that it was like being in a warzone. The experiment showed just how much energy is released when something like a propane tank is exposed to such extreme temperatures. It also demonstrated the importance of safety precautions when dealing with hazardous materials.

The reaction was positive overall, with many viewers praising the experimenter for conducting such an impressive demonstration. However, there were also some voices of dissent, with some people expressing concern about the safety of those involved in the experiment. They argued that such experiments should be conducted under controlled conditions and not in public places where there is a risk of injury or property damage.

Overall, the reaction to the propane tank explosion experiment was one of admiration and awe at how much energy can be released by something as seemingly harmless as a gas tank. It showed just how powerful and potentially dangerous these materials can be if handled incorrectly. While some expressed concern about safety protocols, most agreed that it was an impressive demonstration that highlighted just how important it is to take precautions when dealing with hazardous materials or objects like propane tanks.


The Mythbusters team proved that a propane tank is unlikely to explode by shooting it with a gun. The bullet left a small hole in the tank, but there was no explosion. It was also found that the temperature of the propane in the tank had to be extremely hot before it could even be considered flammable. This means that shooting a propane tank would not cause it to explode, as long as it is not filled with an already flammable gas.

However, this conclusion does not apply to all types of tanks and should not be used as an excuse for anyone who is considering shooting at a propane tank. The Mythbusters team also noted that weaker tanks may still explode if they are shot with high-velocity bullets. Furthermore, any type of tank can burst into flames if it is exposed to direct heat or spark sources such as welding arcs or lit cigarettes. Therefore, extreme caution should still be taken when dealing with any type of pressurized gas containers.

Verified by MonsterInsights